About

With all the training and skills gained during the years, I would like to work in the field of automobiles and to adapt myself in team that gives a scope to enhance my knowledge and potential for the development of the organization. 

Contact Info

P.B.Jacob Alapan,

Masters in I.C.Engines,

Mobile: +91-9032399934

Email: [email protected]

LinkedIn: https://www.linkedin.com/in/berry-jacob-00822470/


Projects by Berry Jacob

Objective: To mesh the given turbocharger model using the ANSA tools taught in the lecture. Procedure: Open the given model in ANSA software. Now select PID in drawmode. Now in quality criteria, go to presentation parameters and checkmark on \"Draw CON Read more

Objective: To perform roof crash analysis on the given model and obtain the required output requests. Given Question: Roof Crush - BIW: Import • Car• Impactor Transforms • This will require (in order)• A 180° rotation about the global z-axi Read more

Objective: To mesh the given model using the ANSA tools taught in the Lecture. *Use element size as 1 unit. Procedure: Open the given model in ANSA software. Now select PID in drawmode. Now in quality criteria, go to presentation parameters and checkm Read more

Objective:  To make use of connectors and attach various parts for the given model. Given: Right_Rail_2 & Front_truss_1:- Seam-Quad(angled+capped+L) Left_Rail_2 & Front_truss_1:- Quad elements Front_truss_2, Front_truss_1 & Right_Rail_1: Read more

Objective: To create 3D meshes for the models provided in the challenge according to the parameters mentioned. 3D Meshing: Tet collapse: 0.15 (for all 3 models) 1. Create Teramesh for Housing model, Elements sizes: 2mm, 5mm, 7mm.  2. For the Read more

Objective: To mesh the given hood component and check the quality as per the given criteria. Procedure: Open the given hood stp file in the Hypermesh. Now extract the mid surface of the model and assign thickness. Cleanup the geometry using quickedit-to Read more

Objective: To perform side crash analysis on the given model and obtain the required output requests. Question: Neon side crash -BIW: Check unit system and either follow [Mg mm s] or [Kg mm ms]. Create appropriate interface ,friction 0.2 and recommended parameters Read more

Objective: To perform frontal crash analysis on the given model and obtain the required output requests. Question: Frontal crash-BIW: Check unit system and either follow[Mg mm s] or [Kg mm ms]. Create appropriate interface ,friction 0.2 and recommended parameters. Read more

Objective: To analyze and compare the 7 cases of a spherical ball hitting the rupture plate with different materials and properties. Given: Case set up and Execution: Case 1:  1. Open the FAILURE_JOHNSON_0000.rad file. 2. Change the shell element pro Read more

Objective: To generate mesh for the bumper system with mesh size=6mm and also compare the base setup simulation results and different kinematic condition simulation results for given crush tube files. Case set up and Execution: Bumper System: Open the Bumper_sys Read more


Loading...

The End