About

Design Engineer in Automotive Firm

Contact Info

No contact info provided.


Projects by GANESH C J

FREQUENCY ANALYSIS OF ROTATING SHAFT Objective :- To perform frequency analysis on a rotating shaft, and to find the resonant frequency. Introduction :- A shaft is a rotating machine element, usually circular in cross section, which is used Read more

Analysis on a Plate with Hole Objective :  To perform Static Analysis on two different plates with Holes. To evaluate for Stress, Strain and Displacement. The 2 Geometric Models are as follows, **All dimensions are in mm   Pre Conditions : Ma Read more

Finite Element Analysis of Buckling Phenomena on a Cyclonic Seperator Stand using Solidworks Introduction BUCKLING Buckling is an instability that leads to structural failure. The failure modes can in simple cases be found by simple mathematical solutions. For comp Read more

COMPARISION OF BENDING IN DIFFERENT TYPES OF BEAMS Introduction : A Beam is a structural element that primarily resists loads applied laterally to the beam's axis. Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forc Read more

FILE PARSING/DATA ANALYSIS OF ENGINE SIMULATION DATA Objective : To extract the various coefficients from the engine_data file and to write a PYTHON program to create Data Visualizer tool. ENGINE_DATA file is as follows, It contains 17 Parameters in seperate Read more

CURVE FITTING Objective : To write a PYTHON program in order to perform Curve Fitting Curve fitting is the process of constructing a curve, or mathematical function, that has the best fit to a series of data points, possibly subject to constraints. Curve fitting Read more

Breaking Ice with Air Cushion Vehicle - Find Minimum Pressure with Newton Raphson Method   Newton Raphson Method The Newton-Raphson method (also known as Newton's method) is a way to quickly find a good approximation for the root of a real-valued fun Read more

Transient Behaviour of a Simple Pendulum A pendulum is a body suspended from a fixed support which swings freely back and forth under the influence of gravity. When a Pendulum is displaced from its initial position, it is subjected to a restoring force due to grav Read more

AIR STANDARD CYCLE : OTTO CYCLE Otto Cycle is an Constant Volume thermodynamic Cycle typically used in Spark Ignition Engines commonly found in Automobiles. A typical Otto cycle consists of Pair of Isentropic Processes which are reversible Adiabatic. Pair of Isoch Read more

R  Robotic Arm - Forward Kinematic  Motion Here 2R stands for "Two Rotational" Joints for an two link Kinematic Chain. Let us consider, length of link 1, l1=1 unit length of link 2, l2=0.5 unit To find the workspace/final position of the ab Read more


Loading...

The End