A passionate Mechanical Engineering graduate, keen learner and hard worker with a deep interest in CAE domain.

I have performed 10+ projects on CAE and product analysis & simulation-based applications. Currently, I'm working as a Team Lead at IndustryARC and pursuing a Masters certification program on Hybrid Electrical Vehicles at SKILL-LYNC.

I have trained and performed relevant projects on product design using various 3D modelling tools and performed CAE simulation for product testing, optimisation and development. I have focused on simulation tools like CONVERGE CFD and ANSYS for 2D and 3D simulation. I'm actively looking for open positions in the CFD/FEA domain.

#### Contact Info

[email protected]

ph. no.-8639834877

### Data Analysis Gaurav Samanta · 2020-01-08 12:32:09

Objective: The objective of this project is to write a code for data analysis from an input file and perform the following operations 1. Compatibility Check: The program will ask for the file name with valid extension which if provided incorrect will terminate the prog Read more

### Constraint Minimization Gaurav Samanta · 2020-01-08 11:52:01

Objective: The objective of this project is to minimize a simple non-linear funtion using Lagrange Multiplier The target equation is: f(x,y)=5-(x-2)^2-2(y-1)^2 & the constrain equation: x+4y=3 Theory: In real engineering applications there is a Read more

### Curve Fitting Gaurav Samanta · 2019-12-27 19:42:51

Objective: The objective of this project is to perform a curve fitting between the temperature and Cp values given the data file   Theory:  Curve Fitting: it is a process of constructing a curve that best fits the provided data series. Curve fitting in gene Read more

### Ice Breaking Challenge Gaurav Samanta · 2019-12-27 19:01:57

Objective:  The objective of this project is to determine the minimum pressure required to break a given thickness of ice using an air cushion vehicle through Newton Raphson Method Equation: `p^3(1-beta^2)+(0.4hbeta^2-(sigmah^2)/r^2)p^2+((sigma^2h^4)/(3r^4))p-((s Read more

### 3D CAD Modelling in Star CCM+ Gaurav Samanta · 2019-12-17 17:47:36

Objective: The objective of this report is to understand the CAD modeller features in Star CCM+ and use it to generate a 3D model of an Ahmed Body and a Convergent Divergent Nozzle in the same as per the drawing given below   Procedure & Results: Conv Read more

### Air Standard Cycle Gaurav Samanta · 2019-12-10 14:51:18

Objective: The objective of this report is to create a python based Otto Cycle simulator which can create the  PV diagram and give the thermal efficiency of the engine as output  Theory: Otto cycle is the set of processes used by the spark ignition Read more

### 2R Robotic Arm Gaurav Samanta · 2019-12-10 14:33:33

Objective: The objective of this report is to simulate the foward kinematics of a 2R robotic arm using python programming   Theory: Robotic arm manipulators are used in various industry verticals such as automotive, electronics, warehouses and logistic Read more

### Solving 2nd order ODE Gaurav Samanta · 2019-12-10 08:14:29

Objective: The objective of this report is the simulate the transient behaviour of a simple pendulum and the create the animation of its motion for a given time interval Theory: The following equation (Ordinary Differential Equation) for the position of the bob w. Read more

### Flow over Bicycle Gaurav Samanta · 2019-11-22 18:54:05

Objective:   The objective of this  study to understand the change in drag force with respect to velocity different cycling positions and drag coefficeint for constant frontal area and constant velocity.   Theory: Cyclists tend to experien Read more

### Steps involved in any CFD Simulations & Industrial Applications of CFD Gaurav Samanta · 2019-11-09 05:13:29

Objective: The objective of this report is to understand the different steps involved in any CFD simulation and the applications of CFD in Medical, Oil & Gas and Construction Industry 1. Steps involved in a CFD Simulation  Step 1. CAD Modelling/Geometry Impor Read more