About

Full-time Mechanical Engineering opportunities with special intrest in Design, Analysis and Product Development

  • Possess the ability to perform Modelling, assembly and drafting using CATIA, SOLIDWORKS, UG-NX
  • Possess the ability to perform Analysis Using  ANSYS WORKBENCH & APDL
  • Other areas of specialization include Numerical Analysis using MATLAB

Contact Info

ARROJU HARISH

Email ID : [email protected];

Contact Number : +919000326622


Projects by Harish Arroju

a new title
Harish Arroju · 2018-11-19 12:30:21

OBJECTIVETo Create a 3D Model of Centrifugal Pump and to run a Flow Simulation.To Obtain a relation between Pressure ratio and Mass Flow rate.INTRODUCTION      Centrifugal Pumps are the sub class of the Turbomachinery. Centrifugal pumps are used Read more

a new title
Harish Arroju · 2018-11-19 12:30:11

OBJECTIVETo Create a 3D Model of Centrifugal Pump and to run a Flow Simulation.To Obtain a relation between Pressure ratio and Mass Flow rate.INTRODUCTION      Centrifugal Pumps are the sub class of the Turbomachinery. Centrifugal pumps are used Read more

OBJECTIVE To Create a 3D Model of Centrifugal Pump and to run a Flow Simulation. To Obtain a relation between Pressure ratio and Mass Flow rate. INTRODUCTION       Centrifugal Pumps are the sub class of the Turbomachinery. Centrifugal pu Read more

a new title
Harish Arroju · 2018-11-13 13:48:17

SIMULATING A FLOW OVER AN  NACA AIRFOILIn this report, a flow over a NACA airfoil has been simulated at the different angle of attack. Our main aim was to determine and compare the drag force ( X-direction ) and the lifting force ( Y-direction )  on Read more

A flow-bench is a device used for testing the internal aerodynamic qualities of a component of an engine, primarily for testing the intake and exhaust ports of cylinder heads of IC engines. Mostly this is used for designing purpose Geometry Creation Read more

Flow over a cylinder
Harish Arroju · 2018-10-29 17:53:33

This project was all about simulating the flow of air over the cylinder In this project, a cylinder was created using solid works CAD software and then the flow of air over the cylinder was simulated using Solidworks flow simulation. Geometry creation and Meshing-&nbs Read more

Flow over an airfoil
Harish Arroju · 2018-10-27 14:52:26

SIMULATING A FLOW OVER AN  NACA AIRFOIL In this report, a flow over a NACA airfoil has been simulated at the different angle of attack. Our main aim was to determine and compare the drag force ( X-direction ) and the lifting force ( Y-direction ) &nb Read more

This project was all about simulating the flow of water inside a pipe. In this project, a pipe was created using solid works CAD software and then the flow inside the pipe was simulated using SolidWorks flow simulation. Geometry creation- The pipe created was a hollo Read more

DATA ANALYSIS
Harish Arroju · 2018-10-09 12:45:56

1. This program uses the data from the extension(.out) file and It also checks the file.compatibility. If the file is not having a proper format then the code will throw an error statement. \". If the format is correct following steps:- 2. Data analysis is carried out Read more

Curve Fitting
Harish Arroju · 2018-10-08 13:45:40

Theory Curve fitting is the process of constructing a curve, or mathematical functions, which possess the closest proximity to the real series of data. By curve fitting, we can mathematically construct the functional relationship between the observed dataset and parame Read more


Loading...

The End