About

No overview provided.

Contact Info

No contact info provided.


Projects by Kartik Suthar

post processing
Kartik Suthar · 2019-10-16 16:11:29

All screenshots are attached in ZIP file.... Read more

Damping co-efficient
Kartik Suthar · 2019-09-24 06:43:17

I) Front sprung mass critical damping 5947.299 Kg/sec     Rear sprung mass critical damping 6526.046 Kg/sec II) Front unsprung mass critical damping 6971.37 Kg/sec      Rear unsprung mass critical damping 5796.55 Kg/sec III) Front sprung mas Read more

Frequency calculation
Kartik Suthar · 2019-09-17 13:07:13

1) I) Rear sprung mass frequency based on wheel base and speed will be 1.358 Hz, time lag because of wheel base and speed is 0.10 sec. II) Front sprung mass frequency at design condition 1.131 Hz III) Front Spring rate 23.853 N/mm IV) Rear Spring rate 27.711 N/mm V) Read more

1. Wheel rate differs from spring rate because of motion ratio. motion ration generates because of suspension geometry like arm length and suspension attachment point etc. And Wheel rate = Spring rate * (MR)`square`. 2. Wheel rate measures by wheel center line consider Read more

Side View Geometry
Kartik Suthar · 2019-08-13 15:13:37

1. Castor- 6 degree positive     Mechanical trail- 15 mm     KPI- 10 degree      Scrub radius- 30 mm     Spindle Length- 90 mm 2. Restoring Moment- 50 Nm 3. Suggested Change to change sign of scrub radius     Read more

1. Instant Center location Y= 950 mm (negative)                                      Z= 235 mm   2. Roll center Height = 190 mm (below ground)   zip file attach Read more


Loading...

The End