Otto cycle Simulation: The project deals with the evaluation of a P-V diagram for the engine otto cycle using Python for given input conditions. Theory: Thermodynamic Otto cycle is considered to be one of the most commonly used practical cycles. Read more

#### Projects by Sunag R A

###
Engine Otto cycle P-V diagram

Sunag R A
·
2019-01-25 12:25:17

###
Derivation of reaction rate ODEs for a simple mechanism

Sunag R A
·
2018-12-21 22:32:32

Derivation of reaction rate ODE for a simple mechanism The derivation of a reaction rate ODEs for a simple combustion mechanism is done. The derivation is done using chemical kinetics compact notation. The reaction mechanism for the derivation is given below as follows Read more

###
Steady state simulation of 2D Prandtl-Meyer expansion domain using Converge CFD

Sunag R A
·
2018-12-02 20:38:20

Prandtl Meyer shock simulation using Converge CFD: The main aim of the project is to do the simulation on a 2D body which involves Prandtl Meyer shock waves. The flow is taken to be steady which does not involve any time-dependent parameters. The inlet flow is sup Read more

###
Transient flow simulation in a Shock-tube using Converge CFD

Sunag R A
·
2018-11-29 10:19:35

Transient flow simulation of a shock tube The project deals with the study of transient flow simulation in a shock tube using Converge CFD software. The shock tube is dealt with pressure variation which produces the shock and the case is done with the transient flow. T Read more

###
Transient simulation of flow over a throttle body

Sunag R A
·
2018-11-23 10:45:10

Transient simulation of flow over a throttle body The present project consists of a transient simulation of a throttle body using converge CFD software. The throttle body consists of a butterfly valve to let the fluid inside the throttle. The geometry of the throttle b Read more

###
Steady-state simulation of flow over a throttle body

Sunag R A
·
2018-10-27 10:35:23

Steady-state simulation of flow over a throttle body The present project consists of a steady-state simulation of a throttle body using converge CFD software. The throttle body consists of a butterfly valve to let the fluid inside the throttle. The geometry of the thro Read more

###
Simple 2D backward facing step simulation using Converge CFD software

Sunag R A
·
2018-10-17 12:48:36

Backward flow simulation using Converge Studio This present project comprises the simulation of the Backward-facing step using Converge CFD software. The simulation is carried for three different base mesh (2e-3, 1.5e-3, and 1e-3) and the mass flow rate profiles are ev Read more

###
2D Channel flow Simulation using Converge CFD

Sunag R A
·
2018-10-13 22:28:59

CHANNEL FLOW SIMULATION USING CONVERGE CFD The project comprises of simulating the simple 2D channel flow in Converge CFD software. The flow consists of two gaseous species Nitrogen and Oxygen with a mass fraction of 0.23 and 0.77 in Oxygen and Nitrogen. The inlet flow Read more

###
Laminar flow simulation using OpenFOAM

Sunag R A
·
2018-09-09 20:55:55

Simulation of pipe through a pipe in OpenFOAM The project comprises of simulating a circular pipe through OpenFOAM software. The flow is considered as laminar flow while the flow parameter calculations are obtained through Hagen-Poiseuille flow. The mesh is done t Read more

###
Blockmesh analysis for Backward facing step

Sunag R A
·
2018-07-08 14:21:42

The simulation of the backward facing step is carried out using icoFoam solver in OpenFoam open source toolbox. The velocity profiles are analyzed for different mesh grid variations and the convergence graph is plotted for the below provided design. fig1: Backward-fa Read more