About

B.Tech. Honours in Mechanical engineering 7.93 CGPA from Aryabhatta College of engineering & research center, Ajmer (Rajasthan Technical University, Kota)

Currently pursuing a Masters in CAE. Working on CFD, Sheetmetal components, plastic components in ANSA and Hypermesh, Radioss and Crash Worthiness.

Seeking a challenging position where I can put my knowledge into practice and gain practical knowledge to utilize my skills with accuracy and efficiency for organization and individual growth.

  • Committed for Task completion
  • Excellent in presenting and communicating complex ideas clearly

Contact Info

 

Email: [email protected]

Linkedin id: www.linkedin.com/in/jitesh-sahjwani-306947154/

 


Projects by Jitesh Sahjwani

OBJECTIVE In this challenge, we check and create the properties for a Neon side crash-BIW model and run the simulation & observe results. Question: Neon side crash -BIW Check the unit system and either follow [Mg mm s] or [Kg mm ms]. Create an appropriate int Read more

OBJECTIVE In this challenge, we check and create the properties for a Neon frontal crash-BIW model and run the simulation & observe results. Question: Frontal crash-BIW Check the unit system and either follow[Mg mm s] or [Kg mm ms]. Create an appropriate inte Read more

OBJECTIVE In this report, we mesh a Bumper assembly.Perform simulation on Crash tube and compare the Type-7 simulation results, Type-11 along with Type-7 and different kinematic condition simulation results. Create six different cases  Run the crash tube model Read more

OBJECTIVE The main objective is to analyze and compare the failure behavior of a plate using different material models LAW-1, LAW-2, LAW-27 & LAW-36 along with Johnson-cook Failure card. For LAW-2, Once use Johnson\'s Failure card along with some certain p Read more

OBJECTIVE Using the crash beam file, Comparison of simulation results of the base setup and improved shell element properties. Questions: 1.Using the crash beam file and change the run time to 55 ms. 2. Change the number of animation steps during simulation to a min Read more

Crash Worthiness analysis of housing and arm bracket using Radioss Hypermesh OBJECTIVE The key objective is to create the 2D and 3D meshing for the given models and solve the following questions PROCEDURE & Answers 1. Material property for steel we can ch Read more

Google drive link for Hypermesh files: https://drive.google.com/open?id=1MDhngswNUUJFrXmWwMTR4jfR0R9T6PKd   OBJECTIVE The key objective is to carry out the geometry cleanup operation & ignore holes less than dia 5mm, extract mid surface and create a 2D mesh Read more

Google drive link for the \'Engine_data.out\' file: https://drive.google.com/open?id=1lIh6RdUZRex9klgtDhpQ0tmtRTBY11YC   OBJECTIVE The primary aim is to create a data visualizer tool using python and perform certain things by this code is: The scri Read more

OBJECTIVE The key objective of writing this program is to perform curve fitting with the help of a linear and cubic polynomial for the Temp. & Cp data. #1. What does popt and pcov mean? #2. What does np.array(temperature) do? #3. What does the * in *popt Read more

OBJECTIVE The main objective is to Minimize the given equation with respect to the given constraint. Problem: This function `f(x,y) = 5-(x-2)^2 -2(y-1)^2` is subject to the following constraint `x + 4y = 3` Solution: Make a new function as `g(x,y) = Read more


Loading...

The End