Menu

Workshops

Projects

Blogs

Careers

Find Jobs


For Business / Universities

Corporate Training

Hire from US

Academic Up-skilling


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Loading...

FOR BUSINESSES

Corporate Upskilling

Hire from Us

FOR Universities

Academic Training

More

Tribhuvankumar Pandit

No Guts No Glory

Skills Acquired at Skill-Lync :

  • HYPER-MESH
  • STRUCTURAL-MESHING
  • SHEET-METAL-MESHING
  • ANSYS-WORKBENCH
  • ANSYS-MESHING
  • ANSA
  • FEA
  • LS-DYNA

Introduction

Mechanical designer with more than 6 years of experience providing technical design direction on mechanical products, machine parts and components. Adept in maximizing form, fit and function through meticulous design model evaluation. Earned recognition as a visionary solutions engineer.

49 Projects

Week 4-1D Element Creation Challenge

Objective:

Aim- Our aim is to create 1D Element for given set of model using different cross section mentioned below all by using Hypermesh Software. Objective- a. Rod element:- Translational DOF should be Constrained with RBE2 link Cross-Section: BOX- Dimension a= 12 mm              …

calendar

18 Feb 2022 12:02 PM IST

    Read more

    Week 6-Meshing of Hood Challenge

    Objective:

    Aim- To do a 2D mesh of given Hood assembly as per given data and to do a quality check as per given condition mentioned below,   Procedure- Intially we have to import the model given to us, for that go to import>>import model and then select file and click on import. The given hood assembly consists of 4 parts,…

    calendar

    10 Mar 2022 02:51 PM IST

      Read more

      Week 8-3D Tetra Meshing Challenge

      Objective:

       Aim-     To perform 3D terta mesh on given models and satisfy given quality criteria.   Procedure- 1.Model-1(Housing Assembly)- Initially ww will import the given model for that go to import>>import geometry>>Step file then hit import. then go to topo mode and do manual geometry cleanup,…

      calendar

      31 Mar 2022 04:59 AM IST

        Read more

        Week 9-Creation of 1D Connectors Challenge

        Objective:

        Aim-      To create 1D element connector to given model, also to create mesh as per given criteria and to satisfy qualty criteria.  Quality Criteria- 1D Connection type- Procedure- Now we will firstly start with model import, for that import>>model import>>select model>>hit import.…

        calendar

        01 Apr 2022 01:00 PM IST

          Read more

          Week 12:Project-1-Meshing of Door Inner Panel Challenge

          Objective:

          Aim-    To extract mid-surface from a given back door panel and to create mesh of the same component satisfying all the quality criteria and to assign thickness to it.  Quality Criteria- Procedure- We start with importing the model for that go to import>>import geometry>>Iges file format select file and hit import. Now…

          calendar

          19 Apr 2022 02:12 PM IST

            Read more

            Week 12:Project 2-Meshing of Rear Wheel Holder challenge

            Objective:

            Aim-       Our goal is to generate mid surface of given component and create mesh and to satisfy quality criteria mentioned in the challenge. Procedure- We will start with importing the model for that go to import>>import model>>select file format as IGES>>Select file location then select file>>hit import. we will check…

            calendar

            24 Apr 2022 10:07 AM IST

              Read more

              Week 1 Stress Concentration on a Plate with hole

              Objective:

              Aim- To Determine max. deformation and stress developed in a given plates by performing structural analysis in Ansys Workbench. Objective- To create 3D model of plate with hole as per given dimesion as per case 1. To create 3D model of plate with hole as per given dimesion as per case 2. To Find max. deformation and stress…

              calendar

              15 May 2022 06:21 AM IST

                Read more

                Week 1 Spur Gear Challenge

                Objective:

                Aim- To perform static structural analysis of spur gears using Ansys Workbench on below mentioned materials 1. Cast Iron 2. Cast Steel 3.Cast Bronze To evaluate results for total deformation, Equivalent stress and stress intensity and comparing the result for all materials and to recommend best material fromdesign point…

                calendar

                18 May 2022 05:27 AM IST

                  Read more

                  Week 3 - 2D meshing for sheet metal

                  Objective:

                  Aim- The main objective of this project is to do preprocessing of the given hood of car i.e. to do geometry cleanup, extraction of mid-surface, mesh generation of model. To provide thickness and material to mid-surface & mesh, also to satisfy the quality criteria mentioned below, Procedure- We start with the model import…

                  calendar

                  22 May 2022 03:52 PM IST

                  • ANSA
                  Read more

                  Week - 4 - 2D meshing for Plastic components

                  Objective:

                  Aim- The main objective of this project is to do preprocessing of the given bottle cap i.e. to do geometry cleanup, extraction of mid-surface, mesh generation of model. To provide thickness and material to mid-surface & mesh, also to satisfy the quality criteria mentioned below, Procedure- We start with the model import…

                  calendar

                  26 May 2022 07:41 AM IST

                  Read more

                  Week- 5 - Solid meshing

                  Objective:

                  Aim- For this project of Rear view mirror component, we have to check for the geometrical errors in geometry and mesh the Surfaces with the given 2D element trai elements with given quality criteria and then to generate 3D tetra mesh and satisfy quality criteria. 2D Quality Criteria- 3D Quality Criteria Procedure-  …

                  calendar

                  26 May 2022 05:08 PM IST

                  Read more

                  Week 6 - Creating connection for Rear door

                  Objective:

                  Aim- For this project for the given Rear door FE model, we have to create and Apply different PIDs for different components. To generate the 1D connections in NASTRAN deck for diffrenet type of joint. Procedure- Given model has been imported to ANSA, it has been observed that there is a Common PID present in the model.…

                  calendar

                  30 May 2022 06:37 AM IST

                  Read more

                  Week - 8 - Morphing

                  Objective:

                  Aim- To test and apply various morphing techniques to given project models and explain the procedure of same and its applications in industries.   Morphing- Morphing is an advanced CAE modeling technique used to modify the shape of mechanical parts and assemblies without returning in the CAD system, which is time…

                  calendar

                  02 Jun 2022 09:10 AM IST

                  Read more

                  Project 1 - 2D meshing on the instrumental Panel

                  Objective:

                  Aim- In this project for the given component, check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned. Procedure- We will first start with model importing and check for geometrical cleanup. Now for geometry check go to Tools>>checks>>geometry>>click…

                  calendar

                  05 Jun 2022 12:53 PM IST

                    Read more

                    Project - 2 - Meshing on the suspension Assembly

                    Objective:

                    Aim- In this project for the given assembly, we have to check for the geometrical errors and mesh with the given element Quality criteria. After meshing the component the thickness has to be assigned for mid surfaces. Use tetra elements to model non-uniform thickness components. Also use Appropriate connections to connect…

                    calendar

                    07 Jun 2022 11:50 AM IST

                      Read more

                      Week 2 Bevel Gear Challenge

                      Objective:

                      Aim- To perform static structural analysis on the given bevel gear and to perform grid dependency test for mesh sizes of 6,5 and 4 mm, to solve it for Von-Mises stress, Equivalent elastic strain, and Total Deformation using the previously mentioned mesh sizes. Grid Dependency Test-  Grid dependency test is to…

                      calendar

                      10 Jun 2022 01:55 PM IST

                        Read more

                        Week 2 Railwheel and Track

                        Objective:

                        Aim-     To Perform a static structural analysis on the Railwheel and Track setup and evaluate results for total deformation, equivalent stress & life under loading condition. Objective- Our main objective is to perform analaysis as per below mentiioned case. Case 1: Multiply the bearing load…

                        calendar

                        14 Jun 2022 09:15 AM IST

                          Read more

                          Week 3 Verification of Weld Joints

                          Objective:

                          Aim- To simulate three different types of welding using three different weld materials by structural analysis. Objective- Weld Material used: Case 1.  Stainless Steel: In this case, the material of the plates must also be the same. Use Stainless steel for both weldments and plates. No need to add flux to the weldments.…

                          calendar

                          17 Jun 2022 11:34 AM IST

                            Read more

                            Week 3 Sheet metal Bending challenge

                            Objective:

                            Aim- We have to perform structural analysis for sheet metal bending & is to be performed for 3 different materials. Variation of certain settings is also to be performed and conclusions are to be added to the report.   Objective- We have to run the analysis for the material : Case 1:Aluminium Alloy 1199( mentioned…

                            calendar

                            20 Jun 2022 01:45 PM IST

                              Read more

                              Week 4 -Wire Bending Challenge

                              Objective:

                              Aim- For this project we will have to perform an analysis to simulate the bending of a wire in ANSYS. We will have to use Copper Alloy (Non Linear), Aluminium Alloy (Non-Linear), and Magnesium Alloy (Non-Linear) for the wire alone. We need to find out the Equivalent stress and Equivalent strain on the wire alone.…

                              calendar

                              22 Jun 2022 07:31 AM IST

                                Read more

                                Week 4- Rolling operation

                                Objective:

                                Aim- For this project, we will have to simulate the rolling operation on a workpiece made of copper using static structural.   Objective- For the given model. We have to increase the length of the workpiece by 60mm and decrease its size on both sides by 8mm. We have to Run the simulation for 14 steps and you can give…

                                calendar

                                22 Jun 2022 02:12 PM IST

                                  Read more

                                  Week 5 Sphere pressing on a plate

                                  Objective:

                                  Aim- For this Project, We have to perform the analysis to simulate a sphere pressing on a plate. Using Structural steel for both sphere and plate but the material of the plate must be Non Linear. We have to press the sphere onto plate 4mm downwards and retract it. The plastic deformation must be captured.…

                                  calendar

                                  23 Jun 2022 06:13 AM IST

                                    Read more

                                    Week 5 Bending of iPhone

                                    Objective:

                                    Aim- We have to perform structural analysis for Iphone bending & is to be performed for 2 different cases. Variation of certain settings is also to be performed and conclusions are to be added to the report.   Objective- simulate the bending of iPhone as per the given cases below Case 1: Simulate the model…

                                    calendar

                                    24 Jun 2022 10:20 AM IST

                                      Read more

                                      Week 7-Long Piston With Cam

                                      Objective:

                                      Aim- For this project, we will have to perform a transient analysis on a piston and cam mechanism model that has been provided to us. We need to run the analysis with Frictionless contact, Frictional with 0.1 and 0.2 as the frictional contact for a total of 3 cases. Find out the Equivalent Stress, Directional Deformation…

                                      calendar

                                      27 Jun 2022 07:25 AM IST

                                        Read more

                                        Week 8 - Universal Joint

                                        Objective:

                                        Aim-       For this project, we will have to perform a transient structural analysis on a double universal joint with a spring using three different materials: Structural Steel, Stainless Steel and Titanium alloy(They can all be found in the General Materials section) The three materials must be used on…

                                        calendar

                                        29 Jun 2022 02:02 PM IST

                                        Read more

                                        Week 8 Worm Gear Challenge

                                        Objective:

                                        Aim- For this project, we will have to perform a transient structural analysis on a worm gear assembly. For the academic version, we need to cut the gear by half so as to bring the model within limits. For the challenge, we have to rotate the worm so as to get to almost end of the half cut and get results for Equivalent…

                                        calendar

                                        30 Jun 2022 07:08 AM IST

                                          Read more

                                          Week 8 Worm Gear Challenge

                                          Objective:

                                          Aim- For this project, we will have to perform a transient structural analysis on a worm gear assembly. For the academic version, we need to cut the gear by half so as to bring the model within limits. For the challenge, we have to rotate the worm so as to get to almost end of the half cut and get results for Equivalent…

                                          calendar

                                          30 Jun 2022 07:10 AM IST

                                            Read more

                                            Week 9 Tension and Torsion test challenge

                                            Objective:

                                            Aim- For this project, we have to perform the tension and torsion test on the specimen provided using ansys workbench. Objective- For the tension test, displace one end of the specimen to 18mm while keeping the other fixed. We will need to find out the total deformation, equivalent stress and temperature of the specimen…

                                            calendar

                                            01 Jul 2022 06:30 AM IST

                                              Read more

                                              Week 9 Machining with Planer Challenge

                                              Objective:

                                              Aim- We will have to perform an explicit dynamics simulation to find out the Equivalent Stress, Total Deformation and also insert a User defined result to calculate the temperature of the body. We need to perform this for 2 cases. One will be with a cutting velocity of 20000mm/s and the other will be with a cutting velocity…

                                              calendar

                                              03 Jul 2022 07:13 AM IST

                                                Read more

                                                Week 10 Bullet penetrating a Bucket Challenge

                                                Objective:

                                                Aim- For this project, we will have to simulate a bullet penetrating into a bucket. We will use 3 different non linear materials for the bucket and analyse their behaviour for the same velocity of bullet. Apply the conditions for bullet as mentioned in the video itself & to upload animation files to show the behaviour…

                                                calendar

                                                03 Jul 2022 10:56 AM IST

                                                  Read more

                                                  Week 11 Car Crash simulation

                                                  Objective:

                                                  Aim- For this project, we will have to perform a parametric study using 3 different values of thickness for the car body by expicit dynamics. Procedure- Here no non-linear material has been not specified to us, so we will use the materials as follow for Car body, Stainless Steel NL- 2. Structural Steel for wall. Now we…

                                                  calendar

                                                  04 Jul 2022 07:11 AM IST

                                                    Read more

                                                    Week - 1 - Consistency of Units

                                                    Objective:

                                                    Aim- To convert given system of measurement to different measurement system (for ex.-SI to CGS) and to provide its conversion factors. Value of the following measurements are given as follows: MASS 1kgLENGTH 1mTIME 1sFORCE 1NSTRESS 1PaENERGY 1NmDENSITY 1Kg/m3YOUNG'S Modulus  210GPaVelocity 56.33KMPHGRAVITY 9.8m/s2…

                                                    calendar

                                                    05 Jul 2022 11:31 AM IST

                                                    Read more

                                                    Week - 2 - Explicit and Implicit Analysis

                                                    Objective:

                                                    Aim- To study the Implicit and explicit analysis methods and how so solve problems using both the methods mathematically. Theory- What Is Implicit Method-    Implicit analysis works by trying solutions or iterations in attempts to establish static equilibrium (within a certain tolerance) with respect to the loading…

                                                    calendar

                                                    08 Jul 2022 08:57 AM IST

                                                      Read more

                                                      Week - 3 Drop test Challenge

                                                      Objective:

                                                      Aim- To create a complete simulation file to perform a drop test from given basic .k file consisting of only nodes and elements. Essential keywords should be added to create a basic solver deck to simulate a drop test. Procedure- Open the LS-PrePost and open the given keyword file. The given input file consists of three…

                                                      calendar

                                                      14 Jul 2022 07:03 AM IST

                                                        Read more

                                                        Week - 4 - Crash Box Simulation

                                                        Objective:

                                                          Aim: To do a complete simulation for crash analysis of box having two different thickness of 1.2 mm and 1.5 mm from the given FE model of crashbox. Objectives- Input. k file and output files (D3PLOT, GLSTAT, SLEOUT, RCFORC) Animation of the final simulation Cross-sectional force generated in the middle of the crash box…

                                                        calendar

                                                        19 Jul 2022 08:19 AM IST

                                                          Read more

                                                          Week - 5 - Modelling Spotwelds

                                                          Objective:

                                                           Aim- to run a crash box simulation using beam spotweld and solid hex spotweld and to compare the results for both type of spotwelds. Objectives- Input. k file and output files (D3PLOT, GLSTAT, SLEOUT, RCFORC) Animation of the final simulation Cross-sectional force generated in the middle of Acceleration plot of a…

                                                          calendar

                                                          21 Jul 2022 11:28 AM IST

                                                            Read more

                                                            Week-6 Calculate the Stretch Ratio by comparing the ELFORM (-2,-1,1,2) with Ogden_Material Model.

                                                            Objective:

                                                            Aim- Given is a Ogden material card which is hyperelastic (rubber). Create a 10x10x10mm solid mesh and run a pure tensile run on it with stretch ratio of 5. Compare different element formulations of solids 1,-1,2,-2 and plot engineering stress vs stretch values.   Explanation- Since this simulation is happening…

                                                            calendar

                                                            25 Jul 2022 10:04 AM IST

                                                            Read more

                                                            Week-7 Head Impact

                                                            Objective:

                                                            Aim-  To perform the Head Impact Simulation and calculate the Head Impact Criterion (HIC) value for the following cases. Objective- To perform head impact analysis and calculate the HIC (Head injury criteria/coefficient) value for the following cases: Case1: Simple head model and rigid wall Case2: Child head-foam…

                                                            calendar

                                                            29 Jul 2022 08:28 AM IST

                                                            Read more

                                                            Week - 8 Mass Scaling

                                                            Objective:

                                                            Aim- To perform the simulation by reducing and stabilizing the runtime with the help of mass-scale factor. Objective- To understand the motive of a computing time with and without a mass-scale factor. By ensuring the stability of mass scaling at 8%. Comparing implicit vs explicit runtime. Basic Theory- Mass scaling In…

                                                            calendar

                                                            30 Jul 2022 06:19 AM IST

                                                            Read more

                                                            Week - 9 Material Modeling from Raw Data

                                                            Objective:

                                                            Aim- By using the diagram of the true stress-strain curve of graphite iron casting. Two curves are there for different material structures. We need to pick any one of them and use the data to create either a MAT_024 or MAT_018 material model and then validate it. Objective- To extract the data from the diagram. Clean the…

                                                            calendar

                                                            04 Aug 2022 12:32 PM IST

                                                              Read more

                                                              Week - 10 Hyperelastic Material Models

                                                              Objective:

                                                              Aim- Use the given material data to build a hyper elastic material cards using Ls-Dyna. Build Mooney Rivlin and Ogden material card by finding their constants using d3hsp file. Perform uniaxial tensile test on Dogbone specimen with 100% strain (i.e. strain = 1) and compare the stress strain data in above cases. Theory-…

                                                              calendar

                                                              06 Aug 2022 07:44 AM IST

                                                              Read more

                                                              week-11 Joint creation and Demonstration

                                                              Objective:

                                                              Aim-   To illustrate the mechanism of spherical, cylindrical, translational and revolute joints between rigid bodies and deformable bodies. The various types of joints can be created in LS-Dyna using the CONSTRAINED_JOINT keyword. Procedure- A. Joints between rigid bodies The various types of joints between…

                                                              calendar

                                                              08 Aug 2022 07:35 AM IST

                                                                Read more

                                                                Independent Research Project

                                                                Objective:

                                                                Aim- To perform static structural analysis on the deep groove ball bearing (std. skf 6208) and to check whether the bearing is suitable for the given application of ATFE or not. Theory- A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose…

                                                                calendar

                                                                08 Aug 2022 11:49 AM IST

                                                                  Read more

                                                                  Bird Strike - Project - 2

                                                                  Objective:

                                                                  Aim- To perform and simulate the non-linear case of Birdstrike in Aero-engine using explicit analysis in LS-Dyna. Objective- The FE model consists of 4 parts that need to be separated and save part-wise. The suitable material is created and saved in a subfolder. The node number, element number, and part number are assigned…

                                                                  calendar

                                                                  09 Aug 2022 11:01 AM IST

                                                                    Read more

                                                                    Assignment 1-2D Meshing Challenge

                                                                    Objective:

                                                                     Aim-       To Mesh the given model passing all quality criteria by extracting mid-surface. Objective- Carry out geometry cleanup operation on the given models. Extract mid surface. Clean mid-surface geometry. Ignore holes less than dia 5mm. Create a 2D mesh with target length 5mm, min 3.5mm max 7mm.…

                                                                    calendar

                                                                    19 Aug 2022 12:55 PM IST

                                                                      Read more

                                                                      Assignment 2-RADIOSS Engine File Editing & 3D Meshing Challenge

                                                                      Objective:

                                                                      Aim-   To check the material properties of the rail component and to calculate the speed of sound in steel rail. To calculate the time taken for a shock wave to travel from one end of the rail to the other given that the length of the rail is 1000 mm. To edit the engine file so that the stress wave can be…

                                                                      calendar

                                                                      09 Sep 2022 11:19 AM IST

                                                                      Read more

                                                                      Assignment 3-2D Element Formulation Challenge

                                                                      Objective:

                                                                      Aim- To perform the simulation on the given model with default properties and change the properties. Compare both CASE 1 & CASE 2. Also, give a detailed explanation of hourglass energy. Recommended properties: Parameters    Comment  Ishell =24   QEPH 4 nodes shells are the best combination…

                                                                      calendar

                                                                      11 Sep 2022 12:12 PM IST

                                                                      Read more

                                                                      Assignment 4-RADIOSS Material Laws Challenge

                                                                      Objective:

                                                                      Aim: To run crash analysis on the given model by applying different materials laws available in Radioss and post-process the results. Objective- 1. The Total number of cycles, Energy error, mass error, and simulation time.2. Notice the animation of all 5 and describe the animations in brief based on whether the…

                                                                      calendar

                                                                      24 Sep 2022 06:30 AM IST

                                                                      Read more

                                                                      Assignment 5-RADIOSS Interfaces & Study of Effect of Notches Challenge

                                                                      Objective:

                                                                      Aim- Create the mesh for bumper assembly,mesh size should be 6mm.  Run the crash tube model as it is. Change the Inacti=6 and run. Create the type 11 contact and run. Remove both notches  and remove boundary condition on rigid body node then run. Create a new notch in the middle ,select the whole section and…

                                                                      calendar

                                                                      14 Oct 2022 11:21 AM IST

                                                                        Read more
                                                                        Showing 1 of 49 projects

                                                                        Academic Qualification

                                                                        B.E

                                                                        Dr. D. Y. Patil Institute of Technology

                                                                        01 Aug 2011 - 15 Jul 2015

                                                                        12th

                                                                        H.P.T. ARTS & R.Y.K. SCIENCE COLLEGE

                                                                        02 Aug 2010 - 01 Jul 2011

                                                                        10th

                                                                        K.V.Naik High School

                                                                        16 Jun 2008 - 01 Jul 2009

                                                                        Schedule a counselling session

                                                                        Firstname is required
                                                                        Lastname is required
                                                                        Please enter a valid email
                                                                        Please enter a valid number

                                                                        Here are the courses that I have enrolled

                                                                        coursecard
                                                                        4.7

                                                                        19 Hours of Content

                                                                        coursecard
                                                                        4.8

                                                                        37 Hours of Content

                                                                        coursecard
                                                                        5

                                                                        5 Hours of Content

                                                                        coursecard
                                                                        Recently launched

                                                                        18 Hours of Content

                                                                        coursecard
                                                                        Recently launched

                                                                        21 Hours of Content

                                                                        coursecard
                                                                        Recently launched

                                                                        10 Hours of Content

                                                                        coursecard
                                                                        Recently launched

                                                                        12 Hours of Content

                                                                        Similar Profiles

                                                                        Dileep kumar  kurmapu
                                                                        Dileep kumar kurmapu

                                                                        consistency is the key

                                                                        sohan G Naik
                                                                        sohan G Naik

                                                                        God is Great!

                                                                        Kundeti Ganesh
                                                                        Kundeti Ganesh

                                                                        just do it

                                                                        SANJO SEBASTIAN
                                                                        SANJO SEBASTIAN

                                                                        Choosing the best skills from the rest

                                                                        Amol Ramesh Pavitre
                                                                        Amol Ramesh Pavitre

                                                                        Electrical Engineer

                                                                        Try our top engineering courses, projects & workshops today!Book a Live Demo