## Channel Flow using CONVERGE STUDIO

The simulation was run by refining the grid size successively in three steps as follows:

Grid Size

1. 2e-4 m

2. 1.5e-4 m

3. 1.2e-4 m

The post-processing results of the three cases are as follows:

1. 2e-4 m

Velocity Magnitude

Mass Flow Rate

Species Mass

Cell Count

2. 1.5e-4m

Velocity Magnitude

Mass Flow Rate

Species Mass

Cell Count

3. 1.2e-4m

Velocity Magnitude

Mass Flow Rate

Species Mass

Cell Count

### Flow over a backward facing step Utkarsh Garg · 2019-01-19 07:43:25

The backward facing step flow project was performed as a part of skill lync challenge. The simulation was performed on three base grid sizes: 1. 3e-4m 2. 2.5e-4m 3. 2e-4m The above grid sizes were chosen due to lack of computation power.   The Results a Read more

### Centrifugal Pump design and Performance Analysis Utkarsh Garg · 2018-10-11 17:14:09

CENTRIFUGAL PUMP DESIGN AND PERFORMANCE ANALYSIS   1. Geometry: PUMP   IMPELLER      2. Performance Analysis of the Centrifugal Pump Performance Analysis of a Centrifugal Pump Velocity normal to face (Outlet Velocity) [m/ Read more

### Flowbench Simulation for Intake Port Utkarsh Garg · 2018-08-12 12:20:33

1. Geometry: All dimensions in mm.   2. Boundary Conditions: Total pressure inlet = 4 bar Static pressure outlet = 1 bar Real wall = all inner surfaces of the cylinder, valve, and intake.   3. Grid dependence study: Goal (Value) Design Point Read more

### Symmetry vs Wedge boundary conditions openFoam Utkarsh Garg · 2018-08-12 08:38:12

Project Report   Assumptions (same as in previous challenge): 1. Reynolds Number = 1000 (For Laminar Flow) 2. Temperature= 20 degree Celsius 3. Length of pipe = 1 m 4. Diameter of pipe = 20 mm 5. At 20 Degrees Celsius (Ref: Saturated Water tables from Cengel Read more

### Iterative Solvers for linear systems Utkarsh Garg · 2018-07-22 10:16:07

Google Drive Link for all sorce code files and functions files https://drive.google.com/open?id=1UE-_9nn7VMuXmUqr3XWFgwbxaaGaNpdX   Outputs: 1. Jacobi Method The program also showed the following output in the command window \"The Jacobi Solver could not co Read more

### Flow over NACA0008 for various Angles of attack Utkarsh Garg · 2018-06-25 18:41:04

Google drive link to all the contours and plot: https://drive.google.com/open?id=1fBI5Zcassvv2ut9o2Qsy7ktrIq3LQx10 The link contains all the plots for various angles of attack and the pressure and velocity distribution for all cases.   The airfoil used was NACA Read more

### Hagen Poiseuille s Flow Utkarsh Garg · 2018-06-15 20:28:52

Google drive link to all the blockMeshDict file for various angles: https://drive.google.com/open?id=1GuYMGjgkJHC8hovIfkqA1sp4k1OdNR1t Google drive link to all the plots and source code: https://drive.google.com/open?id=1ntyenSwIed9JrNxDXwMKVZIeMk0-xNrk   Assu Read more

### Simulation of a 1D Quasi Super-sonic nozzle flow simulation using Maccormack Method Utkarsh Garg · 2018-05-31 14:26:55

Google drive link containing source code for both functions and all the plots https://drive.google.com/open?id=1q-2do7AV4YP2U5ilL54n37U3CXuNoeNK   Observations and Conclusions: 1. Normalized Mass flow rate We see that in case of conservative form of governing Read more