Menu

Workshops

Projects

Blogs

Careers

Find Jobs


For Business / Universities

Corporate Training

Hire from US

Academic Up-skilling


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Loading...

FOR BUSINESSES

Corporate Upskilling

Hire from Us

FOR Universities

Academic Training

More

HTML Projects

Week - 10 Hyperelastic Material Models
Aim- Use the given material data to build a hyper elastic material cards using Ls-Dyna. Build Mooney Rivlin and Ogden material card by finding their constants using d3hsp file. Perform uniaxial tensile test on Dogbone specimen with 100% strain (i.e. strain = 1) and compare the stress strain data in above cases. Theory-…
  • ALIAS
  • BIM
  • CAE
  • CFD
  • CSS
  • DEM
  • FEA
  • GIS
  • HEV
  • HTML

Project submitted by -

submitdetails

Tribhuvankumar

Know more
In this project, I will be simulating an incompressible-laminar-viscous flow through a backward facing step. This will be solved using the software OpenFOAM running on Debian. The solver for this simulation was chosen to be icoFoam, I decided what solver to use from this guide on OpenFOAM's website This is from their guide,…
Dog house design for the Door Trim:Aim: Create the Dog House for the Door Trim considering the design rules and performthe draft analysis for class A and create the final close body component and performthe draft analysis.Objective:Create the Tooling axis Design the class-B and class-C surfaces and join them.Use the Close…
Aim- Given is a Ogden material card which is hyperelastic (rubber). Create a 10x10x10mm solid mesh and run a pure tensile run on it with stretch ratio of 5. Compare different element formulations of solids 1,-1,2,-2 and plot engineering stress vs stretch values.   Explanation- Since this simulation is happening…
AIM:   To design and development of vehicle interior door trim using Catia V5 with given class A surface along with Master section. Also create the Side Attachment features as per design rules.   OBJECTIVE:   To create thickened part using master section for reference To create the mounting features as per design guidelines…
  AIM:   To design and development of vehicle interior door trim using Catia V5 with given class A surface along with Master section. Also create the Side Attachment features as per design rules.   OBJECTIVE:   To create thickened part using master section for reference To create the mounting features as per design guidelines…
Try our top engineering courses, projects & workshops today!Book a Live Demo