Executive Programs

Workshops

Projects

Blogs

Careers

Find Jobs

Corporate Training

Hire from US

All Courses

Choose a category

All Courses

All Courses

CAE Projects

Week - 10 Hyperelastic Material Models
Aim- Use the given material data to build a hyper elastic material cards using Ls-Dyna. Build Mooney Rivlin and Ogden material card by finding their constants using d3hsp file. Perform uniaxial tensile test on Dogbone specimen with 100% strain (i.e. strain = 1) and compare the stress strain data in above cases. Theory-…
• ALIAS
• BIM
• CAE
• CFD
• CSS
• DEM
• FEA
• GIS
• HEV
• HTML

Project submitted by -

Tribhuvankumar

In this project, I will be simulating an incompressible-laminar-viscous flow through a backward facing step. This will be solved using the software OpenFOAM running on Debian. The solver for this simulation was chosen to be icoFoam, I decided what solver to use from this guide on OpenFOAM's website This is from their guide,…

Project submitted by -

Dushyanth

Dog house design for the Door Trim:Aim: Create the Dog House for the Door Trim considering the design rules and performthe draft analysis for class A and create the final close body component and performthe draft analysis.Objective:Create the Tooling axis Design the class-B and class-C surfaces and join them.Use the Close…

Project submitted by -

Aniket

AIM: Surface meshing on a Pressure valve Objectives: To check for the geometrical errors. To perform Topology cleanup accordingly. To set three different target lengths as three different cases and mesh the model. To apply any one target length from the above at a time for the entire model as One case. To write a…

Project submitted by -

Shaik

Aim- Given is a Ogden material card which is hyperelastic (rubber). Create a 10x10x10mm solid mesh and run a pure tensile run on it with stretch ratio of 5. Compare different element formulations of solids 1,-1,2,-2 and plot engineering stress vs stretch values.   Explanation- Since this simulation is happening…

Project submitted by -

Tribhuvankumar

AIM: DESIGN OF RESIDENTIAL BUILDING. Stpep:1 From the file menu new archithech sheet is taken for the modeling of the building. The units are converted into feet by using  the option project units from the manage toolbar. Using the line tool layout is  drawn for the development of the modeling. All the design…

Project submitted by -

Sandeep

Try our top engineering courses, projects & workshops today!